Product Features:

1.This finger ring stand is compatible with all smart phones and tablets that have a flat and non-textured back surface. Effectively prevents the edge of the handset or the lens is worn.
2.The 360° Rotation and 180° Flip open angle gives a comfortable holding for your device.
3.Good for watching movies, playing music or reading books. The outward appearance is fine and various colors are available.
4.When you’re outdoors, hang your fingers and you could flip your phone to the back of your hand and pick something else up.
5.Convenient and safe grip to prevent your phone from dropping and control device while you are operating your phone and taking pictures.
6.Put direct on the car vent magnetic Holder instead of the iron chip, when you drive. A perfect solution for mobile phone GPS navigation and hands-free calls.
7.The Phone Ring Grip can be attached to your mobile phone or tablet to provide a secure grip, so your phone will be never dropped. Adding the Phone Ring Grip also reduces the risk of theft.

Compatible Devices: Fit for your mobile phone (Android device / IOS device), iPad, Kindle, tablet or the case of these above devices, such as iPhone 5/5s/iPhone 5C, iPhone 6/6s/iPhone 6s Plus, iPhone 7/ 7 Plus, iPhone SE, Google Nexus 4/5/6, Nexus 5x/6p, Samsung Galaxy/S5/S6/S7/S7 edge/S6 Active, Note 3/4/5,Tablets and iPads etc.

Installation: 1. Wipe away dirt, dust etc. on the back of your phone, dry it completely. 2. Peel off the protective paper. Do not touch the adhesive surface. 3. Press the ring holder against for 15 seconds. 4. After 24 hours hanging heavy, the effect is much better.

Note: Please choose the best position before putting it on. Remove immediately and stick to the right position if put in the wrong position.

What you get: 1x Encora Finger Grip Stand Holder

Product Features

• [Creative Design] Universal metal finger clip bling diamond ring buckle stand phone holder For IPHONE X iPhone 6 6s 6Plus iphone 7 7Plus iPhone 8 8plus Samsung S9/S9PLUS NOTE8 S8 /S8plus HTC iPad etc Mobile Phone
• [High Quality Materials]: We use the high quality zinc alloy and stainless steel. Zinc alloy have good ductility, avoid breaking it when fall down, stainless steel is sturdy and hold the ring firmly, help it become a long-term good stand.
• [Sturdy Sticker]: This grip holder attached with genuine 3M VHB tape. You can use alcohol paper to clean the phone surface, dry it and press the crystal clear sticker, then stick the ring holder on clear sticker, press to tightly. The crystal clear sticker could prevent the phone/case from foamish sticker type when remove the holder.(All related accessories are contained)
• [Premium Design]: High end 4 layers of coating to keep the original color and prevent it from fading away. Small sized and thinness, diameter is 1.48 inch, thickness is 0.15 inch, designed due to the Ergonomics, will not be bulky. Good partner for fighting with the busy schedule.
• [Widely Used]: It can be used as a phone grip, a table kickstand, a cable winder and many more. With one finger occupied, use your phone with just single hand, greatly reduce the risk of accidently dropping down. We offer this product to make things easier in more occasion.